2GIG REPEATER RPTR1-345
The 2GIG 345MHz Repeater will repeat 2GIG and Honeywell sensor signals to 2GIG panels. By adding a Repeater between the panel and sensor the system can get better range and more reliable signals in difficult RF environments. The Repeater is a plug and play device that will immediately start repeating signals when powered on. The rechargeable battery provides backup power in case of AC power loss.
Optional zone programming to supervise Tamper, AC Loss and Low Battery.
GC2: Requires FW v.1.14 or higher
GC3: Requires FW v3.1 or higher$58.40
2GIG Firmware Update Cable for TS1 UPCBL2
- Quickly and easily update the Go!Control panel and TS1 keypad without incurring the OTA update charges from Alarm.com
- Connect a PC directly to a Go!Control using the Firmware Update Cable to update the Go!Control panel and TS1 keypad to the latest firmware.
12v 4.5Ah Sealed Lead Acid Battery
- Valve Regulated Lead Acid battery (VRLA) – Non-spillable, No acid filling
- Voltage: 12v
- Capacity at 20HR: 4.5Ah
- Terminal Type: 3/16″ Fast-On
- Approx. Weight: 4.19lbs
- Maximum Charge Current: 1.35A
- Dimensions: 3.54″ x 2.76″ x 4.00″
- Dimensions: 90mm x 70mm x 102mm